Anyway, to my inquiry, searching for flywheel balancing, i only came across information regarding flywheels from manual trannies. Now, it seems due to the abrasive action of the clutch on the flywheels, balancing will need to be done. Well, this type of scaring is not experienced by the flywheel of the auto, so do i still need to rebalance it? There is metal removed from the flywheel (not sure whether this was factory or not) in sporatic locations on the perimeter, indicating balancing.. There is also a single peg on the flywheel that mates perfectly to a hole in the flex, implying the balance of both together.
Any insight to this matter is appricated
Jonathan