Page 1 of 1
GU zd30 to td42 throttle cabe.
Posted: Mon Jun 13, 2011 11:56 am
by big lux
What have people done with there throttle cab set up when fitting the td42 motor to there zd30 gu, with the stupid fly by wire crap. any help would be great in the final stage of my conversion.
Re: GU zd30 to td42 throttle cabe.
Posted: Tue Jun 28, 2011 7:09 pm
by Clanky
buy a gu td42 pedal and cable. it bolts in direct swap
Re: GU zd30 to td42 throttle cabe.
Posted: Wed Jun 29, 2011 9:43 am
by MOO_R32
yea what he said, we just bolted a td42 pedal and cable on to his zd30 gu as we are putting a chev in
Re: GU zd30 to td42 throttle cabe.
Posted: Wed Jun 29, 2011 8:05 pm
by andy86
RD28 one will do the job too!
Re: GU zd30 to td42 throttle cabe.
Posted: Wed Nov 09, 2011 9:45 pm
by bexi
Will a GQ td42 pedal work or is it different than the GU one?
Re: GU zd30 to td42 throttle cabe.
Posted: Thu Nov 10, 2011 7:30 pm
by big lux
differnet but will work ,throttle cable will just be on abit of an angle, bito bendy bendy would fix it. Im still using my gq one till i find a gu td42 pedal.
Re: GU zd30 to td42 throttle cabe.
Posted: Thu Nov 10, 2011 9:58 pm
by bexi
thanks big lux ...
SO it bolts straight in but the angle is slightly off where the cable goes onto the pedal ... is that right?
Re: GU zd30 to td42 throttle cabe.
Posted: Fri Nov 11, 2011 10:17 am
by big lux
Yea thats right mate. unbolt and throw the complete zd30 throttle over ya shoulder and the gq one goes straight on but uses one less nut i think. if you bent the top of the pedal abit would reduce the angle but i didnt do this as i stole my throttle out of my winch truck
