Page 1 of 1
swapping to applause dizzy
Posted: Wed Jun 15, 2011 2:09 pm
by misterhoang
hey guys, ive recently dropped an applause motor in, at the moment im using the old feroza dizzy,
the question is the dizzy on the applause motor doesnt have the vacuum lines like the old dizzy, can I still use the applause dizzy?
Re: swapping to applause dizzy
Posted: Wed Jun 15, 2011 2:22 pm
by tehekho
misterhoang wrote:hey guys, ive recently dropped an applause motor in, at the moment im using the old feroza dizzy,
the question is the dizzy on the applause motor doesnt have the vacuum lines like the old dizzy, can I still use the applause dizzy?
You won't have vac advance.
I don't know why you would want to use the applause dizzy if the feroza one works fine.
If you do want to use it though, you'll need to swap all the engine control gear over as well, which will mean re-wiring and such to allow electronic advance of your ignition timing. I've never done this so can't help.
Re: swapping to applause dizzy
Posted: Wed Jun 15, 2011 4:11 pm
by misterhoang
The reason why I want to swap it is because its starting to ping under load. Some of the guys here have said they have used an applauase dizzy when they dropped an applause motor apparently it helped reduce the pinging
Re: swapping to applause dizzy
Posted: Sun Jun 19, 2011 4:12 pm
by tehekho
misterhoang wrote:The reason why I want to swap it is because its starting to ping under load. Some of the guys here have said they have used an applauase dizzy when they dropped an applause motor apparently it helped reduce the pinging
Pull 'er apart and grease all the moving parts, and back off your timing.