Page 1 of 1
Upper adjustable trailing arms
Posted: Sun Jun 19, 2011 11:53 am
by Wozza244
Got the adjustables with the 4" kit, at what stage of spring compression should i install them, eg static, unloaded, loaded?
Re: Upper adjustable trailing arms
Posted: Sun Jun 19, 2011 4:09 pm
by Willy Hilux
Static. It's to get ya pinion angle at the correct position again so no vibs on the road.
Measure from the ground to the bottom of the pinion flange before installing lift kit.
Install lift kit then adjust uppers till you get the measurement from before.
Re: Upper adjustable trailing arms
Posted: Tue Jun 28, 2011 9:04 pm
by TUF-GMH
any1 know that measure in a swb?? i bought mine with a 2inch in it and i put a 3inch in and im trying 2 adjust the arms and having troubles!
Re: Upper adjustable trailing arms
Posted: Wed Jun 29, 2011 10:04 am
by zookimal
If it's vibration you're having trouble with, your new uppers will need to be shorter than the old ones were (if the new lowers are the same length as the old ones)
Re: Upper adjustable trailing arms
Posted: Wed Jun 29, 2011 11:21 am
by Wozza244
My rear is fine, ni vibs and they are set to the same length as the old ones.
The front now has a terrible vibration when the hubs are locked in and driving between locations at about 70-100kmh
What can i do to fix this?
Re: Upper adjustable trailing arms
Posted: Wed Jun 29, 2011 6:10 pm
by blackmav
Unlock your hubs..
you did ask..
Do you have drop boxes?
My old cars did this with caster bushes but the current one with drop boxes dont seem to that I have noticed>