Page 1 of 1
cruiser high pinion
Posted: Mon Jun 27, 2011 9:39 pm
by shortyq
converting std housings to h/p by way of rotating the pumpkin rear section!
question being,by fliping the centre 180'' causes the rotation to run in reverse!
is it a matter of switching centres front to rear and vise versa?
or am i missing something?
Re: cruiser high pinion
Posted: Mon Jun 27, 2011 9:50 pm
by crankycruiser
im confused?
STD housings? out of what?
which end of the car u planning on putting the HP in?
Re: cruiser high pinion
Posted: Mon Jun 27, 2011 10:10 pm
by shortyq
yeah sorry!
75 seies both front and rear!
its actually a hilux 2wd sitting on cruiser axels SOA
Re: cruiser high pinion
Posted: Mon Jun 27, 2011 11:18 pm
by hulsty
Both front and rear diffs are exactlu the same.
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 4:58 am
by 84sloth
nah bloke a mate of myne tried doing this ended up welding up the lot neat as and it went in reverse
wouldnt bother. you would have to get reverse cut gears for the landcruiser 9.5' centres. and for that price you would be better getting high pinion dana 60's
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 10:55 am
by shortyq
yes thats what im asking!
who does the 9.5 reverse cut?
any links?
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 3:14 pm
by hulsty
shortyq wrote:yes thats what im asking!
who does the 9.5 reverse cut?
any links?
NO one. Convert to Ford 9" they can be had reverse cut
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 6:58 pm
by Shadow
just flip it over
low pinion
:D
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 7:56 pm
by Mr DJ
If your really keen on HP front, find a late 75 series cruiser and throw that front diff & drive shaft under there, will be 8" tho same as 80 front.
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 8:11 pm
by Shadow
Mr DJ wrote:If your really keen on HP front, find a late 75 series cruiser and throw that front diff & drive shaft under there, will be 8" tho same as 80 front.
he wants HP rear
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 9:13 pm
by crankycruiser
off topic.............
but why have u sprung over a 2wd???!!!??
Re: cruiser high pinion
Posted: Tue Jun 28, 2011 9:20 pm
by Shadow
crankycruiser wrote:off topic.............
but why have u sprung over a 2wd???!!!??
sounds like hes making a 2wd 4wd
Re: cruiser high pinion
Posted: Wed Jun 29, 2011 10:58 am
by shortyq
crankycruiser wrote:off topic.............
but why have u sprung over a 2wd???!!!??
302 windsor,cruiser running gear,swb,,tube rear on 33s all for under 3k,thats why,no its not a daily!
so it appears there is no h/p gear sets for the 9.5
8.0 yes so that should fix the problem!
anyway cheers for those who tried!
Re: cruiser high pinion
Posted: Wed Jun 29, 2011 11:02 am
by shortyq
Barnsey wrote:ShortyIQ LOLS
you can lols all you like,bansey!
stick to chit chat all your good for!
Re: cruiser high pinion
Posted: Wed Jun 29, 2011 11:10 am
by vk7ybi
http://www.youtube.com/watch?v=yF8XRgDKqIc" onclick="window.open(this.href);return false;
Left is an upside down hilux centre, right is a bundera high pinion.
Re: cruiser high pinion
Posted: Wed Jun 29, 2011 6:39 pm
by shortyq
well i say thankya sir!
thankya very much!