Page 1 of 1
Parts interchangability
Posted: Thu Jun 30, 2011 3:49 pm
by Chucky
Guys,
Will a rear hub off a '93 80 series the same as the rear hub off the 60 series?
AND
Are the front hubs and locking hubs the same as the part time 80 series.
Cheers
Re: Parts interchangability
Posted: Thu Jun 30, 2011 4:10 pm
by hulsty
No on all, free wheeling hubs might fit p
Re: Parts interchangability
Posted: Thu Jun 30, 2011 6:45 pm
by dogbreath_48
hulsty wrote:No on all, free wheeling hubs might fit p
I don't believe the rear hub will fit but i could well be wrong.
AFAIK freewheeling hubs will fit, but won't 'match' the scalloped 80s hub (aesthetic).
Re: Parts interchangability
Posted: Thu Jun 30, 2011 7:32 pm
by Chucky
I was hoping the whole front hub assembly ie everything that sits on the stub axle, would fit from the 80 onto the 60 series.
I didn't think the rear would fit, but I can get that one for only $15 so was hoping.
Cheers
Chucky
Re: Parts interchangability
Posted: Thu Jun 30, 2011 7:36 pm
by STIKA
don't 80s have bigger CV than a 60