Page 1 of 1

Seating in 93 cab/ chassis

Posted: Sat Jul 09, 2011 5:40 am
by cruise75
The seats in my ute have finally lost the cushioning. Before I pay to re upholster them I was wondering if there is another seat combo that would fit. Some say commodore seats bolt in but was after more positive advice. Cheers

Re: Seating in 93 cab/ chassis

Posted: Sat Jul 09, 2011 7:58 am
by McLarryBob
I think one of the recent 4wd Action mags did an article on this.

Re: Seating in 93 cab/ chassis

Posted: Sat Jul 09, 2011 5:32 pm
by coopster
just get surf seat that what im doing

Re: Seating in 93 cab/ chassis

Posted: Sat Jul 09, 2011 6:41 pm
by cruise75
do the surf seats have the sme bolt holes or need to drill new ones ?

Re: Seating in 93 cab/ chassis

Posted: Sat Jul 09, 2011 7:25 pm
by coopster
not sure but most toyota hilux are the same

Re: Seating in 93 cab/ chassis

Posted: Sun Jul 10, 2011 11:11 am
by UhhOhh
yeah they bolt in no worries.

Re: Seating in 93 cab/ chassis

Posted: Sun Jul 10, 2011 7:04 pm
by ae86levin
I put a set of Honda Prelude seats (90's model) in my '94 LN106R.
The front mount points bolt straight up. For the rears I cut out the rivets that held the original seat mounts to the rails and bolted them to the Prelude seat rails.
After doing this they bolted in to the factory floor mount points. I've heard that Integra seats also fit like this.
I've been meaning to do a write up with pics for ages - I'll put it up in the Toyota section tonight.

Re: Seating in 93 cab/ chassis

Posted: Wed Jul 13, 2011 5:53 pm
by cruise75
Thanks guys you have given me a few options to go with. Cheers