Outer Limits 4x4 Board

Hey
After the thread pitch and diameter of an FJ80 tie rod end so i can find the right heim joint to replace them with.

Thanks

shouldve said im after the pitch and diameter for the shank with the jam nut on it.
cheers

its something gay like 23mm fine

Good luck, I couldn't get one when I was chasing some a few years back, but that was just me.

you wont find Heim joints to match the original thread. it is 23mm fine (1.25pitch I think) it is not at all commonly used, ie very specific to Toyota.

heim joints and johnny joints etc are mostly going to be imperial threads
just have a new heavy duty 4130 chromo tierod made to suit whatever heims you are going to use. i had one made for my 80series, cost me $80 for the 32mm 4130 steel and machining to suit 3/4heims.

80's_delirious wrote:you wont find Heim joints to match the original thread. it is 23mm fine (1.25pitch I think) it is not at all commonly used, ie very specific to Toyota.

heim joints and johnny joints etc are mostly going to be imperial threads
just have a new heavy duty 4130 chromo tierod made to suit whatever heims you are going to use. i had one made for my 80series, cost me $80 for the 32mm 4130 steel and machining to suit 3/4heims.

awesome thanks mate

They're 23mm with 1.5mm pitch. LRO have them for $50... http://www.lowrangeoffroad.com/index.ph ... 3-1-5.html" onclick="window.open(this.href);return false;

ive already got the rod threaded for fj80 tie rods i wanted to find out what the thread count was so i could find the correctly threaded heim joint to replace the tie rod with.