Page 1 of 1
23 spline input shaft
Posted: Sun Jul 11, 2004 5:22 pm
by big38l
Where can i get a 23 spline input shaft for my hilux transfer??
Posted: Sun Jul 11, 2004 5:45 pm
by RUFF
Marlin
As far as i am aware they are not available in australia through Toyota.
Marlin does stock these.
23 spline
Posted: Sun Jul 11, 2004 6:06 pm
by big38l
Cool thanks, i checked with marlin before i posted, i was just wondering if we did get them over here ,oh well, have to go o/s shopping!!
Posted: Thu Jul 15, 2004 8:09 pm
by Mczook
G'day Shaun
When i ordered your dual tcase adapter I could have got you one then. Nonetheless as we are their agents I can also get them through All Pro Offroad aswell as Marlin. Let us know if you want one, it will be here in 2 weeks.
Cheers
Sean
23 spline
Posted: Fri Jul 16, 2004 6:47 pm
by big38l
Sean,
Yeah i know i should have ordered it, but i didn`t realise i should have giot the input shaft until i did a bit of research on the marlin site. Anyway i will call you on monday to organise things.
shaun
Posted: Sat Jul 17, 2004 4:41 pm
by Mczook
G'day Shaun & Others who have PM me.
Shaun- you may not require the 23spline it just depends on what engine and gearbox you are running. The larger spline is recommended for use when the engine has been upgraded or when you have replaced your V6 or some turbos tcase with a gear driven unit.
For those wanting prices:
The Marlincrawler Dual Adaptor kit is on special at: $1,350 and comes with:
Double bearing adapter housing, new oversized billet main shaft, double roller bearing pressed and installed, Cage roller bearing pressed, installed, and greased, Marlin Crawler Turtle Knob
key way for shift fork, Toyota transmission output seal, Toyota gasket and seal kit, attaching hardware.
The Marlin Crawler Reduction 4.7 Kit with input spline is on special for $1,250 (normally $1,399) and includes:
Low range gear set
Marlin Crawler turtle knob
New front bearings pressed on and installed
Factory Toyota gasket and seal kit
Toyota transmission output seal and input spline (23 or 21)
The MarlinCrawler 23 input spline is on special for $599 normally $750.
Allpro Offroad offer input splines and reduction gears but they are not currently on special so ring for pricing. However, I will add that their Profields are $750 a pair! & the Bellfields from MarlinCrawler are on special at $950 a pair but are considered stronger than the profields.
For any orders call Matt at M&M Custom 4x4 Engineering on 02 45879811.
Cheers
Sean