Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
long's to suit 80
Moderators: toaddog, Elmo, DUDELUX
long's to suit 80
hi there. im in need of some longfeilds to suit my 80 front diff. spoke to locktup and they havent got any and wont have for sometime they say. has anybody delt with longfeild? whats the go with buying from the states as ive never done it. and its the 30spline super set to fit my 91 diff correct?
My hj47-80series build
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
Re: long's to suit 80
got full 80s set just recently including drive flanges
email with what you want and a full delivery address they will let you know total cost then
all you do is ring them and give them your credit card details
cheers
Gordon
email with what you want and a full delivery address they will let you know total cost then
all you do is ring them and give them your credit card details
cheers
Gordon
Re: long's to suit 80
Order direct, easy as, Terra is a delight to deal with, mine came across in about a week, If your running free wheeling hubs, you need to machine another snap ring groove in the stub axle.
Simon
Simon
Re: long's to suit 80
I only deal direct with Terra from Bobby's ... iv bought a number of sets dircetly from them and had a shit load of replacement cv's through them too... wouldnt run anything else in a Yota... there relablity and warranty is next to none...
Email them what you want they will reply within a day normally pay for it and they will be shipped same day... or you can do it over the phone even easier...
Email them what you want they will reply within a day normally pay for it and they will be shipped same day... or you can do it over the phone even easier...
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: long's to suit 80
Order the 80 axle and burfield set can't get 80 series in 30 spline! I got mine direct!
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Re: long's to suit 80
plan on giving terra a call in the coming weeks. whats the method with having to regroove the cv for the circlip? will i need to do this. i have 1991 80 series and fitted the 80 freewheelers to the front..
My hj47-80series build
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
Re: long's to suit 80
84sloth wrote:plan on giving terra a call in the coming weeks. whats the method with having to regroove the cv for the circlip? will i need to do this. i have 1991 80 series and fitted the 80 freewheelers to the front..
Put it in a lathe and make another circlip groove, most engineering shops should have no dramas doing this
xxxx wrote:
Re: long's to suit 80
nice i shall do thanks for all your help fella's
My hj47-80series build
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
Who is online
Users browsing this forum: No registered users and 0 guests