Page 1 of 1

CB aerial cable switch

Posted: Tue Aug 02, 2011 10:03 pm
by numbnuts
I am wanting to run two aerials for my CB, one gutter mount and one on the B/Bar. Is there a switch that I can get or can I just use an ordinary DTDP switch?

Cheers.

Re: CB aerial cable switch

Posted: Tue Aug 02, 2011 10:22 pm
by Big_DP
numbnuts wrote:I am wanting to run two aerials for my CB, one gutter mount and one on the B/Bar. Is there a switch that I can get or can I just use an ordinary DTDP switch?

Cheers.
http://www.ebay.com.au/itm/120688806146 ... 3D1&_rdc=1" onclick="window.open(this.href);return false;



Image

Re: CB aerial cable switch

Posted: Wed Aug 03, 2011 8:20 am
by DamTriton
Big_DP wrote:
numbnuts wrote:I am wanting to run two aerials for my CB, one gutter mount and one on the B/Bar. Is there a switch that I can get or can I just use an ordinary DTDP switch?

Cheers.
http://www.ebay.com.au/itm/120688806146 ... 3D1&_rdc=1" onclick="window.open(this.href);return false;



Image
Only good for 27 MHz "old school" CB's not the UHF 477MHz stuff we have now. You can't use an ordinary switch to switch RF

Re: CB aerial cable switch

Posted: Wed Aug 03, 2011 9:56 pm
by Big_DP
DAMKIA wrote:
Big_DP wrote:
numbnuts wrote:I am wanting to run two aerials for my CB, one gutter mount and one on the B/Bar. Is there a switch that I can get or can I just use an ordinary DTDP switch?

Cheers.
http://www.ebay.com.au/itm/120688806146 ... 3D1&_rdc=1" onclick="window.open(this.href);return false;



Image
Only good for 27 MHz "old school" CB's not the UHF 477MHz stuff we have now. You can't use an
ordinary switch to switch RF
I thought he said he was using a cb though, not uhf, our am I confused???

Re: CB aerial cable switch

Posted: Thu Aug 04, 2011 9:00 am
by DamTriton
Big_DP wrote:
DAMKIA wrote:
Big_DP wrote:
numbnuts wrote:I am wanting to run two aerials for my CB, one gutter mount and one on the B/Bar. Is there a switch that I can get or can I just use an ordinary DTDP switch?

Cheers.
http://www.ebay.com.au/itm/120688806146 ... 3D1&_rdc=1" onclick="window.open(this.href);return false;



Image
Only good for 27 MHz "old school" CB's not the UHF 477MHz stuff we have now. You can't use an
ordinary switch to switch RF
I thought he said he was using a cb though, not uhf, our am I confused???
Just clarifying for the OP benefit.