Page 1 of 1
help
Posted: Tue Aug 16, 2011 7:17 am
by xXrhodieXx
i have a mq running a L28, recently it has started missing really bad between 1000-2000 revs, i replaced all the usual stuff, fuel filter, coil, leads, plugs, but no improvement, when i am backing off the revs it misse's bad to and starts to backfire, i am leaning toward a fuel prob. Has anyone else out there had this problem, when the foot is down it runs fine, also idle's perfect.
Re: help
Posted: Tue Aug 16, 2011 2:37 pm
by 91Mav
If you replaced most of the ignition system, it's probably the carb. Give it a good clean and check the tune. Pull a couple of the new plugs and have a look at the tip. What colour are they?
Re: help
Posted: Tue Aug 16, 2011 3:58 pm
by MARKx4
I would replace the distributor, rotor button and ignition coil if you haven't all-ready. Then if that doesn't work get the carbi serviced and it will be fantastic.
I had a MK with a L28 and they are a fantastic truck.
Mark.
Re: help
Posted: Fri Aug 19, 2011 7:28 pm
by big red
vacuum leak or inlet manifold leak ?