Outer Limits 4x4 Board

Not really 4x4 tech, but i need to find an offcut mob in Sydney for alloy. All the big places like Alspec and O'Briens will only sell me full lengths, which in the size i need, are 6.5m long , and i only need about 1500mm of the stuff. I cant see the point in buying 6.5m of it, cos the rest will be useless to me.

Sizes i need are:-
- 25mm x 25mm Square Hollow Section, 3mm wall thickness, x 1500mm long
- 31.75mm x 31.75mm Square hollow Section, 3.2mm wall thickness, x 1500mm long

Anyone help me then??

ill have a look at work for ya phil we might have some in the offcut pile

Cheers james

Phill let us know how ya go i realise ya said (sydney) but i think smart aluminium up here cuts to size i canring em and find out 4 ya if ya get stuck




cheers DAN

had a look today sorry dotn have ne phile only got angle offcuts atm

You could try Ullrich at Smithfield or Capral.Capral used to charge $2.00 a cut , Ullrich have a minimum charge for cutting I can’t recall the amount
Charlie