Outer Limits 4x4 Board

Just a few questions that i cant seem to find on here or in tech section.

1) 2' rear lift springs, do they equal 4' (RUF) on the front? has bannana shackels and 2' front drop hanger

2) Have a high pinion center for front, how much will the front drive shaft need to be extended?

3) Does the of drivers side spring perch need raising to be level with drivers side?

4) have 12' shock hoops for front, what length shocks are needed? depending on answer for question 1.

Regards Tom

T0M084 wrote:Just a few questions that i cant seem to find on here or in tech section.

1) 2' rear lift springs, do they equal 4' (RUF) on the front? has bannana shackels and 2' front drop hanger

2) Have a high pinion center for front, how much will the front drive shaft need to be extended?

3) Does the of drivers side spring perch need raising to be level with drivers side?

4) have 12' shock hoops for front, what length shocks are needed? depending on answer for question 1.

Regards Tom

1- no idea.
2- normally, doing RUF will move the front diff forward by about 35mm, so probably 35mm, you can buy spacers.
3- the spring perches on the front diff should already be level.
4- I have 12inch hoops for the front of mine, and I got a set of 12inch Bilsteins.

Search for yamaha308's hilux build probably one of the most comprehensive ruf build ups on the board

TUF-35T wrote:Search for yamaha308's hilux build probably one of the most comprehensive ruf build ups on the board

Very true, heres the link to his build thread.
http://www.outerlimits4x4.com/viewtopic ... yamaha_308" onclick="window.open(this.href);return false;