Outer Limits 4x4 Board

i have taken out my panhard bar as the bushes were shot, ive measure the bush at 45mm, is this the same as factory bushes?

help plz

Shawn

From memory yes.

OK Heres the numbers for anyone interested


55135-01J01 top (small hole)

55135-01J10 bottom (large hole)

Should fit front and rear 1990 on.
2000 on Rears may have different top rear bush

Some pre 1989 rears have a 2 piece rear bottom bush.
Cost from Nissan $16 each

Just wind in on the vice with some slippery stuff.

Bazzle --with new panhard bushes

Bazzle

well after a few calls withou part numbers the other say, was told you cant get seperate bushes for the front, anf they were trying to sell me the whole panhard bar, well this obviously isnt going to work with the 6" lift, as the orig is about 1" too short,

with the part numbers, it seems they have them,

so will these rear panhard bushes fit the front?

Just to clarify what i have just discovered, after having a look at my stock panhard bars complete with bushes,

now, both panhard require 2 bushes,
the diff mounted one, with large hole part# 55135-01J01
and the chassis mount with small hole part# 55135-01J10

as bazzle has said, these should do both panhards depending on the year as stated above, nissan spare parts people know nothing.

Ozy,

what was the price of these bushes? I have some adjustable pandards off a GU that I am putting on my GQ and was wondering if I need to change them what the prices were like.

thanks

Andrew

they were about $17.35 or so each, i may be a few cents off, but 55135-01J01 top (small hole) has to be shipped up from melbourne, they said it should be in 2morrow, i got a quote of $60 to put them in, i decided to have a crack at fitting them myself, anf the first one has slotted in nicely, used a bench vice of course

Moved back to the TOP for Hottiemonster

Should be Hottie missing a Link.

bazzle wrote:Moved back to the TOP for Hottiemonster

Should be Hottie missing a Link.

thanks bazzle