Hi all,
I had problems with the head light and dip switch on a 92 rangie. The head lights were powered through the switch and after 19 years the switch was fried. I installed new switches and put relays into both main and high beam circuts. Now I have a problem where if the inside temperature of the car is hot say been sitting windows up in the sun every thing operates normally, when the inside cools down the indicators don't flash they just stay illuminated, as the temperature is dropping you can hear the flasher relay clicking away. Is this the sound of a crook relay or is the problem somewhere else.
Any thoughts?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
intermittent elec problem, help needed
Moderator: -Scott-
intermittent elec problem, help needed
out of my mind, back soon.
Re: intermittent elec problem, help needed
sounds to me that it's a prob with your flasher unit.
Re: intermittent elec problem, help needed
Yeah my guess would be your flasher unit could be the problem. Just check all your flasher globes work then have a closer look at the flasher unit its self.
Who is online
Users browsing this forum: No registered users and 0 guests