Page 1 of 1
torque settings for fly wheel
Posted: Mon Sep 19, 2011 11:03 pm
by duncan
As it says can anyone let me know the torque settings for the fly wheel bolts on a 97 vitara with the 16b motor thanks
Re: torque settings for fly wheel
Posted: Tue Sep 20, 2011 7:08 am
by VooDoo
Most are around 75ftlb. Use some locktight too.
Re: torque settings for fly wheel
Posted: Tue Sep 20, 2011 10:55 am
by V.W.Dave
Are you talking about the bolts that hold the flywheel to the crank or the press plate to the flywheel?
70fp for the crank
The press plate is only like 25fp or less
Re: torque settings for fly wheel
Posted: Tue Sep 20, 2011 8:14 pm
by duncan
Thanks guys it was for the fly wheel to crank.