Outer Limits 4x4 Board

Hey Guys,

Does anyone have details , or hopefully pics, of how they mounted a 24V alt onto a TD42?

Am thinking of using the hole where the A/C compressor used to be?

Anyone have details of which alt they used and any pics of the mounts?

Thanks,

Welchy

i mounted it up high as far from the mud as possible. i modified the existing bracket to take both alternators and run one belt for both. I can get better pics if you want, this one was actually on the cooler sitting in place

mickyd555 wrote:

i mounted it up high as far from the mud as possible. i modified the existing bracket to take both alternators and run one belt for both. I can get better pics if you want, this one was actually on the cooler sitting in place

I'd need to mount a 12V. I was thinking of underneath the power steering pump but was saving that for an Endless Onboard Air. I would appreciate a better pic of the bracket and how the belt runs both pulleys. Thx

Mounted above the 12v ALT. Only problem is having to remove the radiator hose to change belts. Better spot than under the P/S pump. As alt's aren't fans of mud and dirty water.