Page 1 of 1
40 diff centre
Posted: Tue Sep 27, 2011 8:45 am
by loosecanon
quick easy one guys,
just put the locker in the rear of my 40, and found the Ring gear has some small chips on the edge of the teeth, iv'e done some pricing, and wondering will a 60 series center fit my 40?
both are 4.11,
cheers O/L
Re: 40 diff centre
Posted: Tue Sep 27, 2011 9:45 am
by keencdk
Yeah no worries, 60 centre will fit.
If you are looking for a centre, I have a couple I pulled from my parts vehicle located in Albany Creek. A carton of beer would see one gone if you are interested.
Re: 40 diff centre
Posted: Tue Sep 27, 2011 9:56 am
by loosecanon
P.M.
sent,
can i ask how many splines on the 60 axle?
Re: 40 diff centre
Posted: Tue Sep 27, 2011 10:30 am
by vk7ybi
30...
Re: 40 diff centre
Posted: Tue Sep 27, 2011 11:24 am
by loosecanon
so should be a straight bolt up then?
do many people run a 60 center in the 40?
Re: 40 diff centre
Posted: Tue Sep 27, 2011 11:31 am
by vk7ybi
It will bolt straight in to all but the earliest 40s.. My 40s have 60 centres in them with air lockers, only because they were cheap and it was convenient at the time. I don't know what others do..
Re: 40 diff centre
Posted: Tue Sep 27, 2011 11:35 am
by loosecanon
good to know,
thanks vk7ybi and keencdk,
keep it loose,
Re: 40 diff centre
Posted: Tue Sep 27, 2011 12:46 pm
by shorty_f0rty
i've got a 60 center with an autolocker in the rear of my 40.. straight bolt up but again mine is an '84.
Re: 40 diff centre
Posted: Tue Sep 27, 2011 1:55 pm
by loosecanon
cheers,
yea im running 84 diffs, oh and shorty ill have flex pics up soon, i did the 75 springs!!! flex is awesome,