Page 1 of 1
60 series diff into 75 series
Posted: Fri Oct 14, 2011 6:56 pm
by biegetroopy
can i put a 60 series rear centre into a 75 series troopy front diff and the 75 series front centre inthe back?????[91 model] i am contemplating doing this as i am thinking of putting auto lockers in the front and back[or the 60s diff in the rear ]sounds confusing any help appreciated,cheers mick
Re: 60 series diff into 75 series
Posted: Fri Oct 14, 2011 8:04 pm
by Ricko
Diffs are interchangable. Only problem might be flanges for driveshafts dont match up but they can swapped to suit.
60 diffs are wider, you will have trouble getting a front 60 diff in sprung under. Some options available with hilux hubs etc.
Re: 60 series diff into 75 series
Posted: Fri Oct 14, 2011 8:08 pm
by biegetroopy
im still keeping the 75 series housings, only want to change the centres around and if they are interchangable?
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 7:23 am
by Ricko
Yep, they are interchangable. Like I said, flanges might be different.
78's have a smaller front diff, obviously these aren't.
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 8:46 am
by Z()LTAN
Is it a hzj75 or a hj75?
Hzj have small hp diff which is not interchangeable
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 9:53 am
by biegetroopy
its a hzj75 made in 1991
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 10:10 am
by biegetroopy
it is a high pinion in the front,it looks about the same size in diameter as the back
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 10:16 am
by Z()LTAN
Its not mate. They are not interchangeable at all
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 10:43 am
by SCANAS
x2 with Z()ltan
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 3:05 pm
by Ricko
Sorry mate, gave you a bum steer, high pinion won't interchange with rear.
Re: 60 series diff into 75 series
Posted: Sat Oct 15, 2011 3:58 pm
by biegetroopy
thanks for all the advise its been a great help, just pulling the spider gears out of the 60 series diff to install a lock right ,question is theres 2 shim/ spacers on the large spiders the ones the axles go into ,should i be reusing these on the lockright??????
Re: 60 series diff into 75 series
Posted: Sun Oct 16, 2011 3:54 am
by dogbreath_48
Out of curiosity, what year/month did 75's change to HP front? I understand early HZJ75's still had the low pinion 9.5"??
Re: 60 series diff into 75 series
Posted: Sun Oct 23, 2011 7:00 am
by biegetroopy
hey it did fit in just add oil today and see if lockright works ok
Re: 60 series diff into 75 series
Posted: Sun Oct 23, 2011 9:25 am
by Z()LTAN
If thats the case u dont have a hzj75 mate
Re: 60 series diff into 75 series
Posted: Sun Oct 23, 2011 2:30 pm
by biegetroopy
its a hzj 75 troopy 91 model ive taken the rear lsd out and replaced it ith a 60 series open centre with a lockright, the front is a high pinion which ill take out next , but that is the same diameter as the back not a small diff,
Re: 60 series diff into 75 series
Posted: Sun Oct 23, 2011 2:35 pm
by biegetroopy
just checked the compliance plate and it says hzj75rv !!!!!
Re: 60 series diff into 75 series
Posted: Sun Oct 23, 2011 6:26 pm
by biegetroopy
yes your all right the the front diff is different have to swap my lockright over. bugger