Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ball Joints

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Ball Joints

Post by chugga »

Im going to install new ball joints (upper and lower). Can i do it without taking the brake calipers off and the knuckle? Any tips would be great so i can save time :D
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Re: Ball Joints

Post by mkpatrol »

In what?

Are they bolt in or press in?
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Re: Ball Joints

Post by chugga »

In 1990 Feroza and they bolt on.
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Re: Ball Joints

Post by mkpatrol »

chugga wrote:In 1990 Feroza and they bolt on.

You should be able to. Most ball joints wii come apart at the knuckle & the n un bolt them from the swing arm. Do them one at a time so the kuckle does not fall down & strain the brake hose.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 73
Joined: Tue Oct 30, 2007 4:41 pm
Location: Brisbane

Re: Ball Joints

Post by Percy »

From memory you don't require taking off caliper, a good size hammer and ball joint separator is a must but...
Top
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Re: Ball Joints

Post by chugga »

Thanks for that. It pays to ask some one who has done it.
Top
Posts: 73
Joined: Tue Oct 30, 2007 4:41 pm
Location: Brisbane

Re: Ball Joints

Post by Percy »

Chugga,
I just remembered I did end up unbolting calipers, so that I dropped out the ball joints I wouldn't stretch the break lines, that way I toed it up out of the way, pretty quick to get them off and makes job a little easier.
Top
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Re: Ball Joints

Post by chugga »

Thanks Percy all the info means less time under the car :)
Top
Posts: 212
Joined: Sun Nov 02, 2008 10:53 pm
Location: Sydney

Re: Ball Joints

Post by chugga »

It was easy to change the ball joints. All you need to do is take the brake caliper off the rest is basic. What a improvemnt new ones make!!
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 1 guest