Page 1 of 1

45 series Question

Posted: Fri Nov 11, 2011 4:30 pm
by tasman
just a quick question i've got some rust in the foot wells of the troopy. have been looking at replacing them.

whats the best way to do this

-does someone make replacements
-have thought about cutting it out of another bus but have been unsuccesful so far
-replace it with new sheet metal.

also it looks like there is some sort of black tar like shizer on it and under that it looks like a fiberglass looking compound.

any help would be good thanks as i'm pretty new to the 45 gear. but lovein it

Re: 45 series Question

Posted: Fri Nov 11, 2011 4:41 pm
by SCANAS
1.Yes they make panels in the states still. Cost is :shock:

2. Yeah lots of work for the same problem. Wasting your time.

3. Yep new sheet metal is the best! Clean it all up and start fresh

The black stuff is probably sound deadner or rust proofing. Don't worry about it just clean it off with a wire brush or angle grinder attachment. Clean up the area put in your new peice, paint and re apply some sound deadner or rust proofing over it.

Calling DRS king of delegation for workers to build new 40 floors....

Re: 45 series Question

Posted: Fri Nov 11, 2011 6:51 pm
by TWISTY
There is a mob on the sunshine coast who I believe are about to start producing a lot of rust replacement panels for 40s. I think they have some on ebay already maybe. Bundymonkey has spoke with them so I will hit him up for there contact details and post up.

Re: 45 series Question

Posted: Sat Nov 12, 2011 9:00 am
by Ricko
These guys Twisty? http://stores.ebay.com.au/Aussie-Restos ... 34.c0.m322" onclick="window.open(this.href);return false;

Re: 45 series Question

Posted: Sat Nov 12, 2011 9:17 am
by TWISTY
Ricko wrote:These guys Twisty? http://stores.ebay.com.au/Aussie-Restos ... 34.c0.m322" onclick="window.open(this.href);return false;
Yep, that looks like them Ricko!

Re: 45 series Question

Posted: Sat Nov 12, 2011 11:20 am
by hj 45
That's handy, they need 40 floorpans though. :)

Re: 45 series Question

Posted: Sat Nov 12, 2011 1:24 pm
by Ricko
hj 45 wrote:That's handy, they need 40 floorpans though. :)
Maybe they have them, it's just their ebay store. Give em a ring.

Re: 45 series Question

Posted: Sun Nov 13, 2011 4:03 pm
by tasman
thanks guys. will look into it

Re: 45 series Question

Posted: Mon Nov 14, 2011 11:00 am
by tasman
also the best place to buy new window seals/rubbers. thanks

Re: 45 series Question

Posted: Mon Nov 14, 2011 11:20 am
by SCANAS
Forum member and a mate's father

The Rubber Shop

(07) 3354 2053

Sunshine Coast, QLD

if number not working PM me they have moved shop. Old number should still work though.

Re: 45 series Question

Posted: Mon Nov 14, 2011 3:27 pm
by BundyMonkey
Yes this is the web page http://www.aussierestos.com.au/index.ph ... &Itemid=54 for them and last i spoke with them they are hoping to have the floor pans before Christmas.

Re: 45 series Question

Posted: Mon Nov 14, 2011 3:34 pm
by SCANAS
The Stout in the Aussie Restos page was found and owned by a member here before it was sold to his mate at the coast where they did the body on it.