Page 1 of 1
Sierra Diff short tube length?
Posted: Sun Nov 27, 2011 12:55 pm
by Ben78
Hi all, just have a quick n easy question for someone with a Sierra and a tape measure handy...
For a little project I have in mind I need to find out the length from the centreline of the propshaft to the outer flange on the short side of the diff for both the front and rear. Thanks if anyone wants to go lay under their Sierra for me!
Ben
Re: Sierra Diff short tube length?
Posted: Mon Nov 28, 2011 3:46 pm
by weaves
WT or NT diffs?
i've got a dissasembled WT diff here at work i can measure in the morning if that helps
Re: Sierra Diff short tube length?
Posted: Mon Nov 28, 2011 8:03 pm
by Ben78
Yeah we'll start off with the WT, I am looking for something around the 400-450mm mark, if it has to be the NT then that is ok too. Thanks for your help!
Ben
Re: Sierra Diff short tube length?
Posted: Thu Dec 01, 2011 2:39 pm
by weaves
ive got some bare WT diffs here at work
Rear diff, Centre (pinion) to bolt flange - 490mm
Front diff, Centre to centre of king pin - 390mm
i hope that helps
Re: Sierra Diff short tube length?
Posted: Thu Dec 01, 2011 7:43 pm
by Ben78
Yep, that is absolutely perfect!
Thanks
for that.
Ben
Re: Sierra Diff short tube length?
Posted: Mon Dec 19, 2011 9:20 pm
by flyinwall
so are you going to let us in on what this little project is????