Page 1 of 1

GU 34 spline diff

Posted: Wed Dec 07, 2011 7:32 pm
by big red
What is the GU 34 spline full floater H260 diff out of ?

Re: GU 34 spline diff

Posted: Thu Dec 08, 2011 5:41 pm
by TURBO LS2
GU leaf ute with drums.

Re: GU 34 spline diff

Posted: Fri Dec 09, 2011 6:16 am
by gudge
Some of the wagons came out with them aswell. I think the tb45s?

Re: GU 34 spline diff

Posted: Fri Dec 09, 2011 12:45 pm
by big red
What axle spline is in the 4.8 auto H260 ... 37?

Re: GU 34 spline diff

Posted: Fri Dec 09, 2011 4:22 pm
by mickyd555
big red wrote:What axle spline is in the 4.8 auto H260 ... 37?
yep

Re: GU 34 spline diff

Posted: Thu Dec 15, 2011 2:33 pm
by big red
mickyd555 wrote:
big red wrote:What axle spline is in the 4.8 auto H260 ... 37?
yep
hmmm ...
might be a good thing to pick up a GU 4.8 auto rear housing and put my MK centre in it with the 4.6 ratios.

then i could have separate wheel handbrakes, transmission brake and 4.6 ratio to match my front diff.

Re: GU 34 spline diff

Posted: Thu Dec 15, 2011 8:38 pm
by mickyd555
big red wrote:
mickyd555 wrote:
big red wrote:What axle spline is in the 4.8 auto H260 ... 37?
yep
hmmm ...
might be a good thing to pick up a GU 4.8 auto rear housing and put my MK centre in it with the 4.6 ratios.

then i could have separate wheel handbrakes, transmission brake and 4.6 ratio to match my front diff.

let me know if your keen on one, i might be parting out my ute so you'll just need your gears on my locking centre and your mk will be unstoppable!!!

Re: GU 34 spline diff

Posted: Fri Dec 16, 2011 12:33 pm
by big red
mickyd555 wrote:
big red wrote:
mickyd555 wrote:
big red wrote:What axle spline is in the 4.8 auto H260 ... 37?
yep
hmmm ...
might be a good thing to pick up a GU 4.8 auto rear housing and put my MK centre in it with the 4.6 ratios.

then i could have separate wheel handbrakes, transmission brake and 4.6 ratio to match my front diff.

let me know if your keen on one, i might be parting out my ute so you'll just need your gears on my locking centre and your mk will be unstoppable!!!
does your rear housing have the drum in disc handbrakes ? or is it the normal H260?

Re: GU 34 spline diff

Posted: Fri Dec 16, 2011 8:14 pm
by mickyd555
big red wrote:
mickyd555 wrote:
big red wrote:
mickyd555 wrote:
big red wrote:What axle spline is in the 4.8 auto H260 ... 37?
yep
hmmm ...
might be a good thing to pick up a GU 4.8 auto rear housing and put my MK centre in it with the 4.6 ratios.

then i could have separate wheel handbrakes, transmission brake and 4.6 ratio to match my front diff.

let me know if your keen on one, i might be parting out my ute so you'll just need your gears on my locking centre and your mk will be unstoppable!!!
does your rear housing have the drum in disc handbrakes ? or is it the normal H260?

its got the drums there but all the brake parts are gone, ill let you know if i part it out.