Outer Limits 4x4 Board

Hey guys

Just recieved my lower 25* link mounts and my 60* upper mounts
THe uppers are meant to be self jigging but the jig holes have been cut way too big and allow between 10-12mm movement and 20-24mm movement between the 2.
My lower links are 1500mm long so if theyre even 1* out its going to make a fair difference over the total length.
How do i calcutate where the brackets should jig up exactly,or should i just centre the tabe in the jig holes and hope for the best?
I want to try and get it spot on though so it doesnt have to be re-done later on.

Here is a link to the bracket,you can see in the picture there are 2 rectangular jig holes cut in the top plate,these are too big on mine.
http://locktup4x4.com.au/buggy-truggy-2 ... t-461.html" onclick="window.open(this.href);return false;

thanks
Justin

That sucks mate. Got a hold of chris?

you cant just measure?

I got a hold of chris and he told me there is play so you can adjust your angles,but i wanted both brackets to be exactly 30* to make an overall of 60*.

How do i measure it? ive tried with a protractor but cant figure it out.havent had alot to do with degrees other than at school and doing a few bends with the new bender

Sounds like you have nfi. I guess you need more research and stop asking questions and making money of it!

moking money off what?
No i dont have an idea how to precisely measure 30* when there is no square reference point.
Stop asking questions on a forum?
Are you retarded?

georgey wrote:moking money off what?
No i dont have an idea how to precisely measure 30* when there is no square reference point.
Stop asking questions on a forum?
Are you retarded?

Dude use a plumb line ( line with a heavy weight on the end ) It will give you vertical. 90 degrees of that will give you horizontal and so on ...
Once you have one known angle you can measure any other angle.

a cord ruler is another option for angles.
you need a set of dividers as well, to get the degree off the cord ruler itself.

very accurate.

did any of this help ?

I googled cord ruler with no luck,is there another name?

I havent got around to doing it yet,between xmas and new years and buying a new bike ive had stuff all time or motivation lol

Coilovers will be here start of next week though so they should give me a boost.

Ill let you know it goes.

Cheers
justin