Outer Limits 4x4 Board

Just dropped a 2h with turbo kit from an Auto (no EDIC) after removing the previous 2h (car was and still is manual)

Ive adjusted fuel on a manual 2h (with EDIC, on the back of the pump) Ive done a 12HT (next to 6th injector on front of pump) but completely lost on the auto fuel pump - i cant see any lockwire to even give me a clue! Anyone got any idea?

never mind found on mud.

For future reference.

"Small fuel screw at the top of the pump at the back under the intake manifold.

Undo the 10mm cap (may be wired shut) and remove it. Don't lose the copper washer.

Use the correct allen wrench to hold the adjustment screw in place while you use a 10mm box end to loosen the lock nut.

KEEP TRACK OF YOUR ADJUSTMENTS !!

Add about 1/2 turn fuel (tighten to add fuel on this engine, the 12HT is loosen and the screw is found on the other side of the hump at the top of the pump), and then hold the allen head adjustment screw in place while you tighten the lock nut, replace the washer and cap, then go for a test drive.

Keep your EGTs in check. "

http://forum.ih8mud.com/diesel-tech-24- ... tment.html" onclick="window.open(this.href);return false;