Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
high mount bullbar
high mount bullbar
Guys just wanna know if a.low mount winch will fit.in a bar designed for a.high mount it has holes for both and is a arb bar
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Re: high mount bullbar
It will fit, with mods. Fitting a Tigerz 12,000 lowmount my Hi Mount bar required longer bolts than supplied, for the bottom holes through the Hawse Fairlead to pass through the spacers i had to put between the winch and the bar.. I had to space the winch off the inside of the bar about 10mm. I used some large nuts as spacers, as i didnt have any washers laying around at the time. I do remember it being a fiddly job too, definitely do it with a mate, by myself was very awkward.
Get out there!!
Who is online
Users browsing this forum: No registered users and 0 guests