4BT cummins in GU
Posted: Sun Jan 22, 2012 2:40 pm
Hi all has anyone fitted a 4bt cummins in to a gu ? I am thinking about doing it
Page 1 of 1
Re: 4BT cummins in GU
Posted: Sun Jan 22, 2012 7:45 pm
They're tall and they're heavy...have a look in the 4bt swaps forum...doubt you'll find much on the GU...but you will get info on the motor there.
Re: 4BT cummins in GU
Posted: Wed Jan 25, 2012 6:01 pm
i know of a b4t swap in to a f150, but don't know about in to a patrol.
there have been a few 6bt swaps done in to patrols but they require a 2 inch lift with the hardened suspension.
would be a fair bit heavier than a 4.2 them mainly being a truck engine but they have enormous amounts of torque and would pull anything all day with decent fuel economy
there have been a few 6bt swaps done in to patrols but they require a 2 inch lift with the hardened suspension.
would be a fair bit heavier than a 4.2 them mainly being a truck engine but they have enormous amounts of torque and would pull anything all day with decent fuel economy