Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tore my rear Radius arm bushes.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Tore my rear Radius arm bushes.

Post by bazzle »

When I went from a 2 to a 4inch lift on my current Mav I forgot to loosen 8 rear radius arm bolts to allow bushes to settle at new position.

Didnt even cross my mind :oops:

Mav started to steer a bit under throttle on and off.

Replaced bushes last night.

Steers 99% straight under throttle again.. :P

Theres a Moral here boys........ Dont forget to loosen and retighten bolts when you have lifted :? Could save you over a $100..........

Bazzle
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

i thought u had more than a 2" to begin with.
Gq ute new built
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Re: Tore my rear Radius arm bushes.

Post by Juzza »

bazzle wrote:When I went from a 2 to a 4inch lift on my current Mav I forgot to loosen 8 rear radius arm bolts to allow bushes to settle at new position.

Didnt even cross my mind :oops:

Mav started to steer a bit under throttle on and off.

Replaced bushes last night.

Steers 99% straight under throttle again.. :P

Theres a Moral here boys........ Dont forget to loosen and retighten bolts when you have lifted :? Could save you over a $100..........

Bazzle


Wouldn't have the Nissan part number for these by any chance? ;)
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

hottiemonster wrote:i thought u had more than a 2" to begin with.


thats what cazzle says too :rofl:
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Re: Tore my rear Radius arm bushes.

Post by A1 »

Juzza wrote:[

Bazzle


Wouldn't have the Nissan part number for these by any chance? ;)[/quote]




Juzza i have just sourced these to put in my 4 link rear the part no. off 1 of the bags is

BUSH SPRING

55045-06J00 NISSAN GENUINE PARTS


cheers Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Wouldn't have the Nissan part number for these by any chance? [/quote]




Juzza i have just sourced these to put in my 4 link rear the part no. off 1 of the bags is

BUSH SPRING

55045-06J00 NISSAN GENUINE PARTS


He's right you know :P

Bazzle
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

bazzle wrote:Wouldn't have the Nissan part number for these by any chance?





Juzza i have just sourced these to put in my 4 link rear the part no. off 1 of the bags is

BUSH SPRING

55045-06J00 NISSAN GENUINE PARTS


He's right you know :P

Bazzle[/quote]

:cool: Thanx guys, you are all so efficient on here! :armsup:
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest