Page 1 of 1
how do i convert air con pump continus air
Posted: Fri Jan 27, 2012 8:38 am
by dual lux106
vr air cond pump to continus air. dose any1 know how to do this cheers
Re: how do i convert air con pump continus air
Posted: Fri Jan 27, 2012 4:05 pm
by GUGQ
Have a look here,
http://www.grungle.com/endlessair.html" onclick="window.open(this.href);return false; this is howI did mine, it's been going for a cople of years now
Re: how do i convert air con pump continus air
Posted: Fri Jan 27, 2012 6:55 pm
by dual lux106
Cheers ill check it out
Re: how do i convert air con pump continus air
Posted: Sun Jan 29, 2012 11:24 am
by 4X4 shorty
Hey I tryed this to the V6 Commodore AC pump on my old comp truck all I did was pull it to pieces, pack the bearing with a good grease and put it back together. then I cuts the old fittings off the hoses and put hi temp hose on them to run to the tank.
It would be Ideal to have a grease point for maintance but couldn't see a good place that it would work easy. It was has been going 3 years and sold the car so i think its still going fine
thats only my experience and 2c
Re: how do i convert air con pump continus air
Posted: Mon Jan 30, 2012 7:50 am
by BundyRumandCoke
If your using a Sanden 508 or similar, there is a plug in the side of the casing that can be removed, drilled and tapped for a grease nipple.
Re: how do i convert air con pump continus air
Posted: Wed Feb 01, 2012 9:33 pm
by the gun
I'm using a sandon 508. Made some brackets and jammed it on.
Squirt some oil in it everynow and then. Been on for years.
Re: how do i convert air con pump continus air
Posted: Fri Feb 03, 2012 9:03 pm
by bushy555
Run the air inlet of the compressor into the top oil vent in the engine tappet cover.
Oil mist going into the compressor keeps everything happy. Job done, never worry about it again.
Other than drips of oil in ya tyres...
...which then also keeps rust at bay.