Outer Limits 4x4 Board

Hi all. What thickness material are u guys making your manifolds from? Thanks!

kane077 wrote:Hi all. What thickness material are u guys making your manifolds from? Thanks!

It really depends on the area/size of plenum. but generally 4mm + thick.

Thats what i thought too. Not going nuts, just an increase in flow and a change of inlet direction to suit front mount instal.

checkout the TB48 custom inlets....can be found by 'googleing' the image....they are pretty trick!

Garth your still alive how's the rig going? Duramax?

gudday tye...been awhile i know, rig still going strong besides a head gasket last year from too much advance/boost. Still hunting down a quality LMM dmax drive train without paying 16kUS! might have one outa texas ATM.
All good your end mate?

Yeh not to bad never as you know haha.

Garth, are you not happy with your motor build?

sw1 wrote:Garth, are you not happy with your motor build?

not by any means.......been running it hard for 3-4 years now, had boost set at 30psi for a long time but with the towing it wasnt going to last forever (boats 3.5 ton) so wasn't too surprised when a leak appeared.
Still hits 27psi regularly and is used as a daily drive.
I have been reading some of the recent posts and things have changed a bit since i built mine so if i was to do it again i would approach it differently for sure... ie swafftech pump/turbo, Laminova cooler/inlet etc etc.

the dmax is a new project for a GU4.... but long live the GQ!

OK.

Good to hear your still kick'n on with it.