IFS Bits For Sale - Soon.
Posted: Sun Jul 18, 2004 9:44 am
OK the car is at Cheezy's now so over the coming weeks the IFS stuff will be stripped out.
- 8" HP front diff 4.88 ratio with custom Detroit locker (12 months old)
- 2 x CV's & axles (boots genuine Mitsi) in good nick
- 2 x Pedders HD torsion bars
- 2 x Aisin manual hubs from base model diesel in good nick
- idler arm 6 months old
- 2 x tie rods + 1 new spare
- pitman arm & draglink (straight) !!!!
- 2 x upper and 2 x lower wishbones with all balljoints and bumpstops
- 2 x Koni adjustable gas shocks
- 2 x disc brakes with calipers & Bendix 4x4 pads at 50%
- 2 x knuckles with new wheel bearings & seals
- 28mm diameter front swaybar with air operated Articulator (includes dash switch and all tubing) includes rubber & Nolathane bushes
- front propshaft (minus yoke)
- 2 x front bashplates (under diff one is strengthened)
Looking for $1000 for the lot or may separate individual items. All parts are from a Gen 2 3.0 V6 (93) lwb super select model Jabber.
- 8" HP front diff 4.88 ratio with custom Detroit locker (12 months old)
- 2 x CV's & axles (boots genuine Mitsi) in good nick
- 2 x Pedders HD torsion bars
- 2 x Aisin manual hubs from base model diesel in good nick
- idler arm 6 months old
- 2 x tie rods + 1 new spare
- pitman arm & draglink (straight) !!!!
- 2 x upper and 2 x lower wishbones with all balljoints and bumpstops
- 2 x Koni adjustable gas shocks
- 2 x disc brakes with calipers & Bendix 4x4 pads at 50%
- 2 x knuckles with new wheel bearings & seals
- 28mm diameter front swaybar with air operated Articulator (includes dash switch and all tubing) includes rubber & Nolathane bushes
- front propshaft (minus yoke)
- 2 x front bashplates (under diff one is strengthened)
Looking for $1000 for the lot or may separate individual items. All parts are from a Gen 2 3.0 V6 (93) lwb super select model Jabber.
