Outer Limits 4x4 Board

Hi guys, just in the middle of converting my RD28T GQ to a TD42.
I have most of the pieces but am stuck on the combination of engine mounts. I have cut the 4 bolt ones off the donor chasis and was going to weld them in place but I did read that the early td42 came with 2 bolt mounts like the rd28. I know I have to move the drivers side one forward about 30mm but my question is, which engine mounts (bracket) do I need to use to bolt on the td42 to go in the 4b?
Early tb42?
Any help would be muchly appreciated.
Cheers

PM sent
you dont need to change anything on your chassis.
I have the info and drawings and pics of what you need to do.
Would post it up here, but forgot my photobucket password...

Clanky wrote:PM sent
you dont need to change anything on your chassis.
I have the info and drawings and pics of what you need to do.
Would post it up here, but forgot my photobucket password...

Hey mate could you send me the info. Also have you got some info on wiring I'm doing a GU at the moment

Regards
Mitch