Outer Limits 4x4 Board

Well im gunna make up a internal roll cage ......would like to run iit ova the driver and down to the floor but for ease and quick fab i think i'll just stick with a hoop up just behind the headrest and the usual rear brace back to the floor ..............


Those that have done this have you ran the the mountin through the floor to the chassis to give a solid mount point or just run it as close as possible to the middle body mount bracket for strenght ( just behind drivers seat.)

Duz anyone have any designs that they wish to share or pics


Also i dont want alot of weight is goin for dom a betta way of keepin the strenght up n wieght down also wat else in materials do othas recomend.....


cheers any info or pics shall be awesome


A1

id be tending find out the cams specs, as i believe this will be the way this sport is heading, i believe alot of comps will want cages to be built to cams specs in the future,

the nsw zook club comp squad are saying that cages should be to CAMS spec already

Got mine too cams spec so that I did not have to get it re done later on.
drill holes throught floor to mount not chasis.

Give Sandy Bowman a call, he knows this comp siht.

or that bloke that competes in OBC that is up your way with the blue softtop GQ..

cheers Guys yeah im not really thinkin of ever competin in any comps at this stage really not ever and if i do i'll prob build a buggy

But yeah maybe a good idea to have it built to the specs just to be on the safe side of things is there a site where ya can look up this info or isit gunna be a phone call??





Dan

okay, sent an email to cams and got the below response.

Hi Shawn,

This information is only available in the CAMS Manual of Motorsport.
You can contact the Members Hotline on 1300 653 529 to establish a membership number and you can purchase the Manual for $50 from them.

I hope this helps.

Kindest Regards

Stephanie Nutt
CAMS NSW Office


so theres your replys fellas, make the call, register and buy the manual.

Fuken stoked Shawn awesome work ......................i shall give em a call and look at gettin that mag








Thanx Dude


A1

lry us know how you go buddy