Page 1 of 1
g16b welch plugs
Posted: Mon Apr 02, 2012 8:26 pm
by bobzuki
hey guys had a look through my workshop manual and done a search trying to find out how much i have to pull off motor to replace a freeze plug just behind the water pump tube that hoses connect to i can see a 10mm bolt but how or does this tube come out of behind the water pump any ideas or info
Re: g16b welch plugs
Posted: Mon Apr 09, 2012 11:28 pm
by shandy
think its just held in there with an 'o'ring type seal. could be wrong tho, but that i have always thought
Re: g16b welch plugs
Posted: Tue May 01, 2012 9:39 pm
by bobzuki
thanks shandy the leak had gotton so much worse on last drive so had to fix it was easier than thought was a 12mm bolt undo (it holds the tube still that goes to back of water pump )than just twist and the pipe comes out and was a o ring seal took all of 1/2 hour now no leaks and 10 degrees cooler.thanks again hope this is helpfull to others