Hilux toe in
Posted: Mon Jul 19, 2004 7:30 pm
Anyone know what the toe in on a 94 (ln106) should be 
Thanks, Graeme.
Thanks, Graeme.
You should not have any toe in
IFS 3mm toe out
live axle 0 to 1 mm toe out
Page 1 of 1
Posted: Mon Jul 19, 2004 8:01 pm
Posted: Mon Jul 19, 2004 8:24 pm
Thanks for that toyrex. I've got about 4-5mm atm and the steering wheel is a bit crooked. Must have coped a bit of abump somewhere 
Posted: Mon Jul 19, 2004 9:46 pm
Check the track rod it might be bent if so straighten it
Adrian
Adrian
Posted: Thu Jul 22, 2004 6:29 pm
YEP it was (tie rod bent). Have toe in right but the steering wheel is still crooked. I think the J arm may be bent as it touched the upper bump stop under full articulation so I ground about 6mm of it. All fixed now.
Rough enough is good enough
Rough enough is good enough