Outer Limits 4x4 Board

Hi gurus! I have a hilux with a commo V6 install. Many years ago with my old hilux I fitted a landcruiser clutch master cylinder kit from Marks 4X4 to get more throw on the clutch, this worked well. However I have just fitted a new HD clutch to my newer Hilux and I can't get a cylinder kit from Marks 4x4 they are out of stock so my car is undrivable.

I was wondering if anybody knows the bore diameter of a landcruiser master cylinder or altenatively the hilux V6 master cylinder???
My prefered switch would be from a v6 hilux or 4runner as there would be less modification.

If anyone can help I need to get my car back on the road it would be greatly appreciated.

Regards

Nick

V6 4Runner are 1" master running the 45mm calipers & 25mm rotors up front, would expect the V6 hilux to be the same.

Mr DJ wrote:V6 4Runner are 1" master running the 45mm calipers & 25mm rotors up front, would expect the V6 hilux to be the same.

Cheers mate but is that the brake master cylinder not the clutch???

Yes, my bad. I didn't read it fully/properly sorry.
Don't know how I missed the word "clutch" 3 times !!