Page 1 of 1
high beam switch interchange
Posted: Wed May 16, 2012 10:07 am
by poppywhite
Time to replace the high beam switch on a hzj75 series landcruiser, Is the switch from a hj60 the same and strait interchangable?
Re: high beam switch interchange
Posted: Tue Jun 05, 2012 11:28 am
by poppywhite
payday thursday so I will get a stearingwheel puller and do the chance, just another trip to the city if not work was worth the try to ask
Re: high beam switch interchange
Posted: Tue Jun 12, 2012 10:35 am
by hammey
Cant you try the old GQ trick of smashing each side of the wheel with the outsides of your fists banging down to loosen the taper then jolt it off..
Smitty
Re: high beam switch interchange
Posted: Fri Aug 31, 2012 10:51 am
by turps
Smitty's way generally worked for me. But I did need to give the steering shaft a tap with a hammer at the same time once. Just remember to leave the nut on a couple of turns.