Page 1 of 1
placemant of pyro probe?
Posted: Tue May 29, 2012 9:24 pm
by bhundi
Hey guys just wondering where is the best position for placing the pyro probe,(as in before the turbo or after the turbo). many thanks in advance.
Re: placemant of pyro probe?
Posted: Wed May 30, 2012 6:24 am
by bally
most people go post turbo in the dump pipe for ease.....
Re: placemant of pyro probe?
Posted: Wed May 30, 2012 8:14 am
by gu town
X2
The closer to the pistons, the more accurate it will be.
On that note if I was to place the probe in cylinder 1 or 6 exhaust outlet (as they will be the hottest on a std setup) what max temp would I be looking for?
Re: placemant of pyro probe?
Posted: Wed May 30, 2012 1:14 pm
by hulsty
Pre turbo, IMO post turbo is a waste of time and money and gives little to no value.
Re: placemant of pyro probe?
Posted: Wed May 30, 2012 6:37 pm
by Skegbudley
hulsty wrote:Pre turbo, IMO post turbo is a waste of time and money and gives little to no value.
Mabee if you have a 4.2.
It works well after the turbo on a ZD30. Beats sticking your head in a hole in the ground.
Re: placemant of pyro probe?
Posted: Wed May 30, 2012 6:38 pm
by Skegbudley
50mm past the turbo flange works fine.
Re: placemant of pyro probe?
Posted: Wed May 30, 2012 9:35 pm
by bhundi
thanks for the reply everyone.sounds like pre turbo is the go.There is a grub screw there allready.just got to get it out.seems very tight.
Re: placemant of pyro probe?
Posted: Sat Jun 02, 2012 11:02 pm
by TURBO LS2
Soak it in moretein fly spray...Trust me a ship builder showed me.
Re: placemant of pyro probe?
Posted: Sat Jun 09, 2012 8:45 pm
by bhundi
cheers turbo ls2 i will give it a go.