Outer Limits 4x4 Board

Does anyone know how to reset a computer on the 4.8. ?
In the process of replacing the maf sensor on it as its running like a pig on idle and surging on power through the rev range and now the engine light is on.

Does anyone know if its possible to bypass the maf sensors on these like they do on modern v8s ?

thanks

Hi Rizzo

Can't help with your problem in any way, but I noticed you haven't specified the vehicle. I presume Patrol 6?

yes mate , gu wagon 4.8 6cyl in line petrol. it has 302000kms goes very hard , but recently havin dramas with the maf sensor, had it cleaned but due to turning the ignition on the other day with the sensor out it has the engine light on now since i done that. Purchased a new sensor , wanted to know if its possible to reset the computer at home or have they gota be bought into town and plugged in to reset ??

Try disconnecting the battery for 30 minutes then reconnect & see what happens.
Quite a few vehicles reset when you do this

Cheers

Had similar issues with fault codes on mine and with the exception of a water temp gauge fixing itself all others required a plug in...