Guys, in case anyone is after 3.15 reduction gers for their Gen2.
Hardmanns have re specced the design meaning a lowering of the reduction ratio from 3.15 to 2.70 due to the small modding required for the 3.15 to fit.
They will however do a special re run of 3.15 if they can get a minumum order of 20 sets.
see here for more info
http://www.4x4wire.com/forums/showflat. ... rt=14&vc=1" onclick="window.open(this.href);return false;
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
reduction gears for Gen 2
Moderator: -Scott-
reduction gears for Gen 2
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Who is online
Users browsing this forum: No registered users and 1 guest