Outer Limits 4x4 Board

I seem to be going around in circles.

Im looking for flush mounted round LED tailights around 3in in diameter.

For my new tray, 4in seems too big, for which there are plenty of.

What have you guys used? Pics?

Would 4in suit?

I've seen some really schmick looking round LEDs on tradies utes recently, they would have been around 4" or maybe 90mm. Looked good IMO

I think most are around 90mm these days.

I too was after 75mm round flush mount LED's.

I guess I spent 20 hours searching the net then another couple going through all the local Auto Spark's catalogues.

All I can sy is if they exist I can't find em.

I don't think they exist.

I looked for a while for 80 odd MM lights but gave up and got these for $90 on Ebay.

The ones I have in my shorty would be perfect if they still made them.



And no you can't have them.

you can get gromet mount 50mm ones i think hella do them

amber ones
red ones

Thanks guys.

Found these yesterday....

http://www.hella.co.nz/Resources/lib...e/LED_2010.pdf" onclick="window.open(this.href);return false;

"2390" series

Rhett wrote:

How'd the stickies hook up after the burnout?

cant really rember. was about 4 years ago. i better go do another skid to jolt my memory i remember now they poped the concrete floor

vanbox wrote:Thanks guys.

Found these yesterday....

http://www.hella.co.nz/Resources/lib...e/LED_2010.pdf" onclick="window.open(this.href);return false;

"2390" series

Well just got a price from QLD diesel spares....

$146ea for red and amber
$200ea for white.

Nearly 1k for tray lights!

Apparently Powerful4x4 rear bar lights are rubbish.

Any other suggestions?

Ebay has a massive selection of LED tailights Vanbox, like I said above, most are around 90mm. There are some really nice ones on there, thats where I got mine from.
Otherwise, your local Bursons, or Repco would be worth a look.

Dudelux, have spent hours looking over ebay, all seem to be 4in or bigger. Any smaller arent flush mount.

May have to mount a square light behind a round hole?

Anyway you could make 4in work on your tray??
Instead of finding lights that will suit the rear of the tray, find lights that you like and make the rear of the tray suit them.