Outer Limits 4x4 Board

I need help to find a high quality replacment radius arm after bending 1 at the recent cliffhanger,
We are running 3rds arms with the 80 series bush in the rear at the moment but have heard they are no longer avaliable.
Do you have any sugestions ?

Superior superflex ??

I checked the site for the superior arms and they dont seem to come with the 80 series bush on the end.
I was also told Cass Jones makes them anyone know of this or how to contact him ?

unlimited industry's do an 80 style rear bush drop arm or big o's

Thanks for that. But the car has been modded to put the thirds arms and im doing some enquiries and it seems that putting new arms may require fitting drop boxs. I'm sure many of you have done this so i'm wondering whats involved in this, how hard is it and do you have any pics of the finished job.

I could be wrong but aren't the bush OD's the same (80 & Nissan). I CBF'd taking off the RA's on the Winch Lux.
So you just change chassis bushes although I think there is a slight bush OD width difference.


brooksy

Coighty1 wrote:I checked the site for the superior arms and they dont seem to come with the 80 series bush on the end.
I was also told Cass Jones makes them anyone know of this or how to contact him ?

Contact Mick at superior he could probably make a set for you.

Call Buddy at Buds customs. He has made heaps of custom radius arms. Theres no probably at Buds. Theres just definatelys.

Do you have the contact details for BUDS,

Coighty1 wrote:Do you have the contact details for BUDS,

O417708598 email address is on buds customs website in the contact section.

steve from Big o was a good price and quick on delivery too, very happy with the style and durablity seems to look good. just put some Gu bushes in and they flex nicely with out the big cost. around about 1k i payed for bushes genunine from nissan and the radius arms

you wont pay a lot more than that for super flex arms with the good bushes already in them.