Outer Limits 4x4 Board

hey guys i have a 98 80 series fulltime 4wd , ive been looking up suspension for a while 3 inch seems to b the way to go because any bigger you get problems with vibration and what not being a fulltime. what do you guys suggest?

Suspension Stuff 3" flexi lift, hands down value for money.

yer thats what im thinking the kit for 2290 , i am goin to have a fair bit of bar work and draws ect so am not sure if i will go flexy coil cuz i think i will have to much weight what u think?

Stick with king coils. I've got 2 sets. Both had minimal sag in 6 years. I put flexys in. They sagged over 50mm in 12 months.

I'm back to kings now

I've got a 3" kit from Superior in mine. Very happy with it. Where I work I can get parts from Carrolls Springs (EFS) at trade price and the price difference is huge. I will say though when I bought the kit I was working elsewhere and the technical knowledge fom Superior gtting the right spring rates was well worth it.

ok cheers guys

I have king coils in mine. some 8 years now. Front are std 3". rear are HHD? Extra heavy duty. No sign of sag.
Must be careful tho. boys in blue may take an interest and say it is too high.
Only problem I have is a getting a decent of shocks. Currently have 3" lift EFS.
Also need to space up the bump stops so shocks don't bottom out.
Have offset caster correction bush in front. Bad thing about this is the bush is too hard and it broke part of axle brkt.

James