Outer Limits 4x4 Board

Hay guys, got a 4" old man emu lift and have been ruinning 285/75R16 with no problems. just got a set of 315/75r16 and they have removed the paint from my inner wheel arch and chassis on the rear. my brother had a 100 series and got the offset changed on his rims to fit 35's at $75 per rim.
does anyone know what offset the standard gxl rims are and what offset should i get to fit 35's, plus anyone know where to get cheaper after market rims.

Standard rims are zero offset, you should be ok with 35s on stock 8" rims.
I had 35s on my 80series, 4" lift, 16x8" zero offset rims with no issues.
I had more issues with my 33s which were on zero offset 16x10" rims.

i have the standard 16x8 gxl rims. maybe have something to do with bump stops.

Be careful with cheap aftermarket rims, some are piss weak.

Google procomp wheels, I had a set, they were tough as and not too pricey.


Are your 35s rubbing paint off in both left and right wheel arch? Have you got adjustable panhard rods?

Ive got a set of neg 38 16x10s on my 80 in procomp 52 series. tough as rims and no rubbing. tyre will sit out level with the flare.

You if you are worried, a 2 inch body lift will fix it using stadard toyota rims

Have no scrubbing or rubbing at all with 15x10 neg 44 offset.

im running deg 44 15x10s aswell no scrubbing

15x11 neg 44, 35,12.5 no scrubbing.