Page 1 of 1

front bar tube size

Posted: Tue Aug 28, 2012 7:18 pm
by flyinwall
After hitting a kangaroo the other night i have decided that i need to make myself a solid front bar and i am not sure what size tube to use
i was going to start with a piece of 4"x2" box and go from there but i am unsure what would be the best way to go so can anyone help with designs or suggestions
the vehicle in question is a 99 mitsubishi challenger
and yes i did search but not much came up for me

Re: front bar tube size

Posted: Tue Aug 28, 2012 11:20 pm
by RAY185
Don't they have airbags?

Re: front bar tube size

Posted: Wed Aug 29, 2012 6:50 am
by flyinwall
unfortunatly yes it does

Re: front bar tube size

Posted: Wed Aug 29, 2012 7:35 am
by stock 4runner
If it has air bags you can't legally mate your own bar but it's up to you weather you do or not

Re: front bar tube size

Posted: Wed Aug 29, 2012 8:48 am
by brooksy
Depends on airbag system used.


brooksy

Re: front bar tube size

Posted: Wed Aug 29, 2012 9:18 am
by DaGMan
4wd built after 2007 - Regulations 2004 states that it is a requirement that vehicles built to comply with ADR 69 - Full Frontal Impact Occupant Protection continue to do so.

Re: front bar tube size

Posted: Wed Aug 29, 2012 9:19 am
by DaGMan
Summary of the australian standard for bull bars

http://www.racv.com.au/wps/wcm/connect/ ... +bull+bars" onclick="window.open(this.href);return false;

Re: front bar tube size

Posted: Wed Aug 29, 2012 7:19 pm
by flyinwall
if my understanding of this is correct i dont need to comply with any of it as my vehicle is a 99 model and this starts at 2000 models

ADR 69: full frontal impact occupant protection

Applies to :
All new model passenger cars sold from 1 July 1995 and 1 Jan 1996 for all new passenger cars.
All new off-road passenger and forward control passenger vehicles from 1 Jan 2000 (and all new models from 1 Jan 1998)
ADR 72: dynamic side impact occupant protection

Applies to :
All new passenger cars sold from 1 Jan 2004 (and all new models from 1 Jan 1999)
All off-road passenger and forward control vehicles from 1 Jan 2004(and all new models from 1 Jan 2000)
ADR 73: offset frontal impact protection

Applies to :
All new passenger cars (with a gross mass less than 2.5 tonnes) sold from 1 Jan 2004 (and all new models from 1 Jan 2000)
It does not apply to off-road passenger or forward control vehicles.

taken from here http://www.racv.com.au/wps/wcm/connect/" onclick="window.open(this.href);return false; ... +bull+bars (mind you that is victoria and im in qld)

Re: front bar tube size

Posted: Wed Aug 29, 2012 7:26 pm
by flyinwall
brooksy wrote:Depends on airbag system used.


brooksy

can you give me more details as to what i can do