Outer Limits 4x4 Board

Guys

Im after information on wiring in a 4l60e transmission to a Injected 5lt.. It orginally had a mechanical T700

What do i need...

Thanks Matt

Assuming you've got an auto PCM, you'll just need the loom. If you've got a manual ECU, have a look at these http://bmracing.com/?wpsc-product=shift ... 4l60e4l65e" onclick="window.open(this.href);return false;. You can find them on eBay US for cheaper

91Mav wrote:Assuming you've got an auto PCM, you'll just need the loom. If you've got a manual ECU, have a look at these http://bmracing.com/?wpsc-product=shift ... 4l60e4l65e" onclick="window.open(this.href);return false;. You can find them on eBay US for cheaper

Thanks Mate,

I ended up stripping the 4l60e and the T700 and swapping internals so it stays a mechanical shift box.. pumps, clutch packs etc.. are the say in both boxes.

Too easy. Run the pump from the 4L60e if you aren't already. They're the bigger 13 vane pumps. How's the buggy going?