Bent diff in Darwin (need help)
Posted: Mon Oct 01, 2012 10:58 am
hey guys,
A few mates and i are going around Australia until christmas and a little while ago we noticed the rear diff was bent. We are in darwin at the moment and we really need to fix the problem as we have sheared the first drive stud and have excessiive inside tyre wear. The car is a 75 series with 80 series diffs under it and we need to find a place were we can get hold of a second hand diff housing and weld some spring hangers on it. Also, if anyone has a shop or some fabrication equipment we can pay to use that would be awsome too
Luke
A few mates and i are going around Australia until christmas and a little while ago we noticed the rear diff was bent. We are in darwin at the moment and we really need to fix the problem as we have sheared the first drive stud and have excessiive inside tyre wear. The car is a 75 series with 80 series diffs under it and we need to find a place were we can get hold of a second hand diff housing and weld some spring hangers on it. Also, if anyone has a shop or some fabrication equipment we can pay to use that would be awsome too
Luke