Page 1 of 1
Aisin Manual Hubs ?
Posted: Sat Jul 24, 2004 2:40 pm
by revnkev
Frank mentioned in a previous post
but since fitting Aisin manual hubs (from a Triton) I haven't had any
trouble.
Do these hubs fit the 2.8 Diesel ( 3.5 V6 ) front end as well ?
Or only the 3.0 V6 ?
Also what year model Triton are they off ?
Thanks, any info is appreciated
Posted: Sat Jul 24, 2004 4:27 pm
by Bitsamissin
Yes they will Kev, the outer splines are the same on all Gen 2's so the Aisin manual hubs of a base model Paj diesel or a Triton will fit.
They won't fit an NM onwards however as they have fixed (non removable) hub flanges.
Posted: Sat Jul 24, 2004 9:08 pm
by revnkev
Thanks for that Frank,
was hoping that was the case, I can get AVM manual hubs from
TJM or ARB but they want $225 a set ,was hoping the Aisin ones
would be a cheaper option.
Hope all is going well with your SAS and those other trans
gears
Posted: Sun Jul 25, 2004 9:59 am
by Bitsamissin
Kev, don't buy the AVM ones I did as they are plastic and strip the Allen keys easily I had probs with mine.
I got my Aisin ones from Smart Parts in Ballarat for $150 / set ph - (03)5334 1806 Geoff is the man.
Posted: Sun Jul 25, 2004 1:39 pm
by revnkev
Thanks for the advice Frank,
you are a wealth of Mitsubishi knowledge