Outer Limits 4x4 Board

hey guys im currently in the process of converting my hilux to a v6 using the t700 box i was wondering if anyone new how to change the output shaft ? any help would be great

cheers andrew

strip the box right down to change it, never swaped on myself had a auto shop rebuild my whole auto while it was apart. i have a built t700 with adapter fitted and 304 v8 for sale. email me yld106@hotmail if you interested

Its easy .. if you have the right tools you can have it replaced in about 15-20mins.. just ensure you all the clutch packs are aligned before fitting pump back to it..

Remove, sump, pump, soleniods, shift dampener and your 1/2 way there.. then pull the guts out drop the circlip of the shaft and slip the shaft out.. reverse to assemble.

Thanks mate well I just took the box to the auto shop turns out it was pretty shagged so
Got it fully rebuilt and did a shift to. But iv just tryed to bolt it all up and the throtle body
On the v6 is hitting the fire wall befor the motor bolts to the gear box. Anyone had this
Problem ? The adapther is from advance adapters any help would be great
I'm thinking about cutting the fire wall out where the throtle body is hitting and move it back
Not to sure yet .